Image 1 of 6
Image 2 of 6
Image 3 of 6
Image 4 of 6
Image 5 of 6
Image 6 of 6
The Built Bottom End Performance oil supply sandwich plate offers an easy and inexpensive way to add an additional high pressure oil feed to your build. <br>Well-suited for turbo feeds, pressure gauges, temperature gauges, and more. Made from the highest quality billet 6061 T6 aluminum with a robust hard black anodized coating, this piece will take your Endeavor to the next level.<br> Compatible with stock blockoff plates. <b>Not compatible with factory oil coolers.</b> <br><br> <b>🗸 An easy way to add a port to the oil system</b><br> <b>🗸 Use for turbocharger oil supply, pressure gauge, temp gauge, etc.</b><br> <b>🗸 No invasive drilling or tapping required</b> <br> <b>🗸 Easy to install </b> <br> <b>🗸 Aesthetically pleasing </b> <br><br> High quality material and surface finish<br> Billet 6061-T6 Aluminum<br> Black hard anodized coating<br> Includes new fasteners with serrated locking heads<br> Includes new oil resistant Buna-N O-rings to provide leak-free seal<br><br><br> <b>Install Instructions</b><br> 1. Thoroughly clean the area near the oil cooler block off plate, to prevent debris from contaminating the oil system.<br> 2. Place an oil catch can or rags under the oil cooler block (or block off plate) to catch any oil that may leak out.<br> 3. Loosen the two 10mm bolts and remove.<br> 4. Remove the stock blockoff plate and factory gasket.<br> 5. Clean the mating surfaces.<br> 6. Install the Built Bottom End Performance oil port sandwich plate with included o-rings and stock blockoff plate. <br> 7. Torque the 10mm bolts to 89 in-lbs.